Larson Davis SoundAdvisor 831C Reference Manual page 14

Power Supply
Tripods
Other Hardware
Optional Software
SoundAdvisor Model 831C
Cables for Environmental Monitoring
• CBL152 Cable; 426A12 to 831 Signal, 20'
• CBL153 Cable; 426A12 to 831-INT Control, 20'
• CBL154 Cable; 426A12 to 831C Control, 20'
• CBL203 Cable; PRM2103 to 831Control, 20'
• CBL208 Cable; PRM2103 to 831-INT Control, 20'
Cable for use with PSA027 Universal Input Power Supply AC Power
Adaptor
• CBL140 Cable; 831 Power, 2.5 mm JACK, 1'
• PSA027 Universal 90-240 AC Power Adaptor providing power
from electrical outlet, used to power the SoundAdvisor in
conjunction with CBL140, CBL145 or CBL154. 1.25 A, 2.5X5.5X14
mm
• BAT015 External battery holder for the 831, holding 4 or 8 D-
sized alkaline 1.5 volt batteries to extend run time
• TRP001 Instrument/Camera Tripod with ADP032 1/2 in.
microphone clip used with EPS2116
• TRP002 Microphone Stand with Boom
• TRP003 Support Tripod, heavy duty, can be used with EPS029,
EPS030 and EPS2116
• ADP091 Mounting adapter, 426A12 TO TRP003
• TRP019 Permanent 17' tilt down pole.
• TRP020-06 Heavy duty 6' tripod
• TRP020-10 Heavy duty 10' tripod
• TRP020-15 Heavy duty 15' tripod
TRP020-20 Heavy duty 20' tripod
Calibrators
• CAL200 Class 1 Sound Level Calibrator, 94/114 dB @ 1 kHz
• CAL250 Class 1 Sound Level Calibrator, 114 dB @ 250 Hz
Soft Case
CCS032 pouch with belt clip
DNA (Data Navigation and Analysis) software
Accessories 1-6