Scrolling Display; Status Display Of An Axis - Mitsubishi Electric MR-J4-10B(-RJ) Instruction Manual

4. STARTUP

4.3.2 Scrolling display

(1) Normal display
When there is no alarm, the axis No. and blank are displayed in rotation.
(2) Alarm display
When an alarm occurs, the alarm number (two digits) and the alarm detail (one digit) are displayed
following the status display. For example, the following shows when [AL. 32 Overcurrent] is occurring.
After 1.6 s
Status Blank
After 0.2 s
Status Axis No.
(1 digit) (2 digits)
"b" : Indicates ready-off and servo-off status.
"C" : Indicates ready-on and servo-off status.
"d" : Indicates ready-on and servo-on status.
After 0.8 s After 0.8 s
Status Alarm No.
After 0.2 s
Status Axis No. Alarm No.
(1 digit) (2 digits) (2 digits)
"n": Indicates that an alarm is occurring.
4 - 11
Blank
Alarm detail
(1 digit)