Mitsubishi Electric MR-J4-10B(-RJ) Instruction Manual page 615

APPENDIX
(b) Battery unit (assembled battery)
Model
ER6 MR-J2M-BT
MR-BAT6V1
CR17335A MR-BAT6V1SET(-A)
MR-BAT6V1BJ
(2) Purpose
Safer transportation of lithium metal batteries.
(3) Change in regulations
The following points are changed for lithium metal batteries in transportation by sea or air based on the
revision of Recommendations of the United Nations Rev. 15 and ICAO-TI 2009-2010 edition, and IATA
Dangerous Goods Regulations 54th Edition (effective January 1, 2013). For lithium metal batteries, cells
are classified as UN3090, and batteries contained in or packed with equipment are classified as
UN3091.
(a) Transportation of lithium metal batteries alone
Packaging requirement
Less than eight cells per package with
less than one gram of lithium content
Less than two assembled batteries per
package with less than two grams of
lithium content
More than eight cells per package with
less than one gram of lithium content
More than two assembled batteries per
package with less than two grams of
lithium content
Cells with more than one gram of lithium
content
Assembled batteries with more than two
grams of lithium content
Option model Type
Assembled
battery
(Seven)
Assembled
battery (Two)
Assembled
battery (Two)
Assembled
battery (Two)
UN3090 PI968 Section II
UN3090 PI968 Section IB
UN3090 PI968 Section IA
Lithium Mass of
content battery
4.55 g 112 g
1.20 g 34 g
1.20 g 34 g
1.20 g 34 g
Classification
The package must pass a 1.2 m drop test, and the
handling label with battery illustration (size: 120 ×
110 mm) must be attached on the package.
The package must pass a 1.2 m drop test, and the
handling label with battery illustration (size: 120 ×
110 mm) must be attached on the package.
The Class 9 hazard label must be attached or
others to comply with dangerous goods (Class 9).
The package must be compliant with Class 9
Packages, and the Class 9 hazard label must be
attached or others to comply with dangerous
goods (Class 9).
App. - 2
Remark
Assembled batteries with more than
two grams of lithium content must be
handled as dangerous goods (Class 9)
regardless of packaging requirements.
Assembled batteries with more than
0.3 grams of lithium content must be
handled as dangerous goods (Class
9) depending on packaging
requirements.
Main requirement