Setting Button Assignments (Prefs/Utility Menu) - Sony DVS-9000 User Manual

To select a destination selection button for a snapshot
To set whether snapshots are recalled for each destination selection button
individually, use the Panel >Aux Assign >RTR Mode Setting menu as follows.
1
2

Setting Button Assignments (Prefs/Utility Menu)

To assign functions to the user preference buttons ([PREFS 1] to [PREFS 16])
in the menu control block and the memory recall buttons in the utility/shotbox
control block, display the Panel >Prefs/Utility menu.
To display the Prefs/Utility menu
In the Engineering Setup menu, select VF2 'Panel' and HF4 'Prefs/Utility.'
The status area shows the settings of the user preference buttons.
Assigning functions to user preference buttons
1
334
Setup Relating to Operations From the Control Panel
Use any of the following methods to select the destination selection button
to which the setting applies.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Dest No Selection of destination selection
button
Press [SS Enable], turning it on or off.
On: When a snapshot applying to the router is recalled, the recall also
applies to the selected destination selection button.
Off: When a snapshot applying to the router is recalled, the recall does not
apply to the selected destination selection button.
Note
When a destination selection button is set to Inhibit, then even if SS Enable
is on, the snapshot for that destination is not recalled.
In the Panel >Prefs/Utility menu, using any of the following methods,
select the button to be assigned.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Setting values
1 to 128