2 Instruction Descriptions
Programming in the Remote Node
In this example, programming is also required in the remote node. The order of sending and receiv-
ing is reversed in comparison with the above procedure.
1
The SktUDPCreate instruction is used to request creating a UDP socket.
2
The SktUDPRcv instruction is used to request receiving data. The received data is stored in
RcvSocketDat[].
3
The SktUDPSend instruction is used to request sending data. The data in SendSocketDat[] is
sent.
4
The SktClose instruction is used to close the socket.
2-1050
NY-series Instructions Reference Manual (W560)