Ny-Series Instructions Reference Manual (W560 - Omron NY532-5400 Reference Manual

Value of ErrorID
16#2C00
16#2C01
16#2C02
16#2C05
16#2C06
16#2C07

NY-series Instructions Reference Manual (W560)

Value of ErrorIDEx
16#0030 0000 The specified Unit is busy.
16#8001 0000 Execute the instruction again.
The specified Unit is not supported for connection.
16#0031 0000
Check the version of the Unit.
16#80000000 An error occurred in the communications network.
16#80050000 Execute the instruction again.
16#81010000
16#81020000
16#82020000
16#82030000
16#82060000
to
16#8FFF0000
16#90010000
to
16#FFFE0000
16#8002 0000 An error occurred in the communications network.
16#8003 0000 Reduce the amount of communications traffic.
16#8103 0000
16#8200 0000
16#8004 0000 An error occurred in the communications network.
16#8100 0000 Check the Unit and cable connections.
16#8201 0000 Make sure that the power supply to the Unit is ON.
16#8204 0000
16#8205 0000
16#9000 0000
An attempt was made to queue more than 192 RestartNXUnit and
16#0000 0000
NX_ChangeWriteMode instructions.
16#0000 0000 A timeout occurred during communications.
An error occurred in the EtherCAT network.
---
Check the value of UnitProxy and the EtherCAT network configura-
tion.
The specified Unit is already being restarted from the Sysmac Stu-
16#00000000
dio. Therefore, this instruction does not need to be executed.
A slave that cannot be specified for the instruction was connected at
16#0000 0000 the slave node address of the specified Unit. Check the value of
UnitProxy and the EtherCAT network configuration.
2 Instruction Descriptions
Meaning
2
2-841