Ny-Series Instructions Reference Manual (W560 - Omron NY532-5400 Reference Manual

Value of
ErrorID
16#2C00
16#2C01
16#2C02
16#2C03
A CPU Unit with unit version 1.05 or later and Sysmac Studio version 1.06 or higher are required
to use this instruction.

NY-series Instructions Reference Manual (W560)

Value of ErrorI-
DEx
16#00120000 The value of UnitProxy is not correct.
16#00130000 Set the variable that indicates the specified EtherCAT Coupler Unit
16#00150000 again.
16#00160000
The specified node address is not correct.
16#00140000
Make sure that the Unit configuration is correct.
16#00300000 The specified Unit is busy.
16#80010000 Execute the instruction again.
The specified Unit not supported for connection.
16#00310000
Check the version of the Unit.
16#80000000 An error occurred in the communications network.
16#80050000 Execute the instruction again.
16#81010000
16#81020000
16#82020000
16#82030000
16#82060000
to
16#8FFF0000
16#90010000
to
16#FFFE0000
16#80020000 An error occurred in the communications network.
16#80030000 Reduce the amount of communications traffic.
16#81030000
16#82000000
16#80040000 An error occurred in the communications network.
16#81000000 Check the Unit and cable connections.
16#82010000 Make sure that the power supply to the Unit is ON.
16#82040000
16#82050000
16#90000000
The number of instructions that can be simultaneously executed was
16#00000000
exceeded.
16#00000000 A timeout occurred during communications.
16#00000000 The size of the send message is not correct.
2 Instruction Descriptions
Meaning
2
2-951