Ny-Series Instructions Reference Manual (W560 - Omron NY532-5400 Reference Manual

2 Instruction Descriptions
• An error response defined by CIP was returned.
• The text string in RoutePath is not valid.
• More than 32 CIP-related instructions were executed simultaneously.
• A response was not received even though the timeout time was exceeded.
• There is a setting error for the local IP address.
• A duplicated IP error occurred.
• For this instruction, expansion error code ErrorIDEx gives the CIP message error code. The mean-
ings are as follows:
Value
16#02000000
16#04000000
16#05000000
16#08000000
16#0C008010
16#0C008011
16#1F000102
16#1F008007
16#20008017
16#20008018
16#20008028
16#26000000
Sample Programming
Refer to the sample programming that is provided for the CIPUCMMSend instruction (page 2-1035).
2-1034
Normal communications are not possible due to a high load at the remote node.
The specified source variable is one of the following data types and it does not exist on the
other Controller.
• Basic data type
• Enumeration
• Structure
• Union
• Array
The specified source variable is one of the following and it does not exist on the other Control-
ler.
• Enumeration enumerator
• Structure member
• Union member
• Array element
The requested service does not support.
The specified destination variable is being downloaded.
The specified destination variable has a Constant attribute, so it cannot be written.
The inaccessible variable is specified.
The specified destination variable is not an array and the number of elements to write is not 1.
The specified destination variable is an array and the number of elements to write exceeds the
number of elements in the array.
• The specified destination variable is an enumeration and the write data is not the value of an
enumerator.
• The specified destination variable has a Range Specification attribute and the write data is
out of range.
The specified destination variable name is only the NULL character.
Error

NY-series Instructions Reference Manual (W560)