Ny-Series Instructions Reference Manual (W560 - Omron NY532-5400 Reference Manual

2 Instruction Descriptions
Advancing
If the value of Advance changes to TRUE during instruction execution, processing moves to the begin-
ning of the next step.
 Timing for Advancing
The operations of the time-related variables when processing is advanced to the next step are
described in the following table.
Name
ElapseTime
ProgressTime
LeftTime
StepProgressTime
StepLeftTime
 Changing the Value of StartStepNo and Advancing Processing at the Same
Time
If you change the values of StartStepNo and Advance to TRUE at the same time, changing the
value of StartStepNo is given priority. Therefore, processing moves to the start of StartStepNo.
2-782
Continues timing.
Gives the total of TimeWidth from step 0 until the current step.
Gives the time from the next step to the end of EndStepNo.
Contains 0 because processing moves to the start of the next step.
Gives the value of TimeWidth for the next step.
Operation

NY-series Instructions Reference Manual (W560)