Ny-Series Instructions Reference Manual (W560 - Omron NY532-5400 Reference Manual

2 Instruction Descriptions
• For this instruction, expansion error code ErrorIDEx gives the CIP message error code. The mean-
ings are as follows:
Value
16#02000000
16#04000000
16#05000000
16#08000000
16#0C008010
16#0C008011
16#1F000102
16#1F008007
16#20008017
16#20008018
16#20008028
16#26000000
Sample Programming
Refer to the sample programming that is provided for the CIPOpen instruction (page 2-990).
2-1014
Normal communications are not possible due to a high load at the remote node.
The specified source variable is one of the following data types and it does not exist on
the other Controller.
• Basic data type
• Enumeration
• Structure
• Union
• Array
The specified source variable is one of the following and it does not exist on the other
Controller.
• Enumeration enumerator
• Structure member
• Union member
• Array element
The requested service does not support.
The specified source variable is being downloaded.
• The specified destination variable has a Constant attribute, so it cannot be written.
• The write data does not agree with the number of write elements.
The inaccessible variable is specified.
The specified destination variable is not an array and the number of elements to write is
not 1.
The specified destination variable is an array and the number of elements to write
exceeds the number of elements in the array.
• The specified destination variable is an enumeration and the write data is not the value
of an enumerator.
• The specified destination variable has a Range Specification attribute and the write
data is out of range.
The specified destination variable contains only the NULL character.
Error

NY-series Instructions Reference Manual (W560)