1: Port 1
2: Port 2
The data type of DeviceType is enumerated type _eDEVICE_TYPE.
The meanings of the enumerators of enumerated type _eDEVICE_TYPE are as follows:
Enumerator
_DeviceNXUnit
_DeviceEcatSlave
_DeviceOptionBoard
In this instruction, you can specify _DeviceNXUnit.
An error occurs if this instruction is executed for Units other than NX-series Communications Interface
Units.
Timing Charts
The following figures show the timing charts.
Normal end
TRUE
Execute
FALSE
TRUE
Busy
FALSE
TRUE
Done
FALSE
TRUE
Error
FALSE
ErrorID
*1 Serial line monitoring is stopped.
Error end
TRUE
Execute
FALSE
TRUE
Busy
FALSE
TRUE
Done
FALSE
TRUE
Error
FALSE
ErrorID
NY-series Instructions Reference Manual (W560)
Meaning
NX Unit is specified.
EtherCAT slave is specified.
Option Board is specified.
*1
Cleared to 0.
Updated to result. (16#0000: Normal)
Cleared to 0.
Updated to result. (16#****: Error)
2 Instruction Descriptions
2-1241
2