Removing And Installing Ball Joint In Slider Tube Bridge; Removing And Installing Ball Joint In Fork Bridge - BMW R 1100 S Repair Manual

X
Tightening torque:
Screw connection between fork bridge and frame
(use new nut or
(clean thread + Loctite 2701)...................... 130 Nm
Clamp, fork fixed tube to fork bridge
(free from oil and grease).............................. 22 Nm
Sliding-fork bridge to leading link
(use new nut or
clean thread + Loctite 2701)....................... 130 Nm
31.6
Removing and installing ball joint in slider tube
bridge
31 5 672
31 5 670
•
Mount the slider tube bridge in retaining fixture,
BMW No. 31 5 670/672.
•
Use w/f 46 socket, BMW No. 31 5 630, to re-
lease and tighten ball joint.
X
Tightening torque:
Ball joint to slider tube bridge
(apply Never Seez to thread) ...................... 230 Nm

Removing and installing ball joint in fork bridge

31 5 630
31 5 670
•
Secure fork bridge in retaining fixture,
BMW No. 31 5 670.
•
Use w/f 46 socket, BMW No. 31 5 630, to re-
lease and tighten ball joint.
X
Tightening torque:
Ball joint to fork bridge
(apply Never Seez to thread) ...................... 230 Nm
31 5 630
S310040
S310050