Fork Bridge Offset - BMW HP4 RACE Rider's Manual

Fork bridge offset

Setting
The HP4 Race concept pro-
vides the option to adjust the
fork bridge offset to four offsets
using different inserts. Special
tools and additional tools such as
the engine jack or safety stands
on the frame and footrests are
required for this; how to han-
dle these tools is not addressed
further here. If you are not sure
whether this work is within your
skill range, please contact a spe-
cialist workshop, preferably a
BMW Motorrad partner.
Adjusting the fork bridge
offset
Remove the engine spoiler
( 128).
Removing right fairing side
panel ( 129).
Remove left fairing side panel
in the same way.
Lift the motorcycle with the en-
gine jack so that the front end
is relieved. Secure the motor-
cycle against falling over.
Remove front wheel (
Remove screws 1 and fork par-
tition 2.
123).
Remove screws 1.
Loosen screws 2.
Remove steering head nut 3.
Raise top fork bridge 4.
Remove fork bridge insert 1.
5
53
z