Removing and installing telescopic
fork
Removing and installing telescopic
fork without fork bridge
•
Remove front wheel.
•
Remove mudguard.
•
[ABS] Remove sensor.
•
Remove brake line retainer.
•
Place a support beneath the telescopic fork.
•
Heat leading link mount at front to max. 120 °C
(248 °F) and unscrew.
•
Remove fasteners (cable ties) securing Bowden
cable for starting-speed increase and brake line.
31 5 603
31 5 601
•
Remove fastener securing fixed tube in upper
fork bridge while holding the hexagon of the fixed
tube and then pull the telescopic fork down to
remove.
R21310020
R21310070
31.5