1
17
16
18
19
20
Disassembling/assembling output
shaft
Disassembling output shaft
e
Caution:
To avoid damaging the needle roller bearing on the
splines, spread it carefully at the end face when re-
moving.
00 7 500
20
•
Using universal puller, BMW No. 00 7 500, pull
off grooved ball bearing (22) together with
1st gear wheel (20).
23.14
2
3
4
15
14
13
12
21
22
22
KR230110
5
11
10
9
8
•
Remove spacing washer (21), shift gear wheel for
1st gear (20), needle roller bearing (19) and
spacing washer (18).
•
Remove sliding gearwheel (7).
•
Remove circlip (8), backup washer (9), shift gear-
wheel for 3rd gear (10) and needle roller
bearing (11).
•
Remove backup washer (12), 4th gear shift
wheel (13), needle roller bearing (14) and backup
washer (15).
•
Remove circlip (16) and sliding gearwheel for
5th gear (17).
•
Turn output shaft (6) other way round and clamp
into the vise with soft jaws.
•
Using universal puller, BMW No. 00 7 500, pull
off deep-groove ball bearing (1) together with
shift gearwheel for 2nd gear (4).
•
Remove shim washer (2), needle roller
bearing (3), shift gearwheel for 2nd gear (4) and
thrust washer (5).
6
7
KR230100