Disassembling/Assembling Output Shaft; Disassembling Output Shaft; Disassembling Tensioning Gear - BMW k 1200 rs Repair Manual

2
1
Disassembling/assembling output
1100
shaft

Disassembling output shaft

•
Take off needle roller race (1) and circlip (2).
•
Pull output shaft (3) out of damper housing (9)
and take off rubber damping elements (11).
•
Drive the output shaft out of the inner section of
the damper (10) with a plastic-faced hammer.

Disassembling tensioning gear

4
•
Clamp the damper housing into a vise with soft
jaws, to take the pressure off retaining ring (4).
11.34
3
10
11
•
•
•
•
L
Inspect all parts for damage or wear.
KR110460
7
8
9
Remove retaining ring (4) with suitable pliers.
Insert a puller, BMW No. 00 8 400, in the oppo-
site cutout of the gearwheel and pull ball
bearing (5) off with pressure block,
BMW No. 33 1 307.
Take off spacing ring (6), turn tensioning
gearwheel (7) clockwise with counter-holder,
BMW No. 12 4 600 and pull upwards.
Remove tensioning spring (8).
Note:
4
5
6
KR110450