V7 III ABS
•
Unscrew and remove the filler plug (1).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Check and if necessary, replace the
sealing washers of drainage plug (2).
•
Remove any metal scrap attached to
the drainage plug (2) magnet.
•
Remove the air filter (3) and clean it
•
Check the O-Ring (4) and if necessary
replace it
•
Screw and tighten the drainage plug
(2)
•
Pour in new oil, observing the quantity indicated in the table "capacity"
•
Tighten the filler cap (1).
CAUTION
DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO THE FLUID. WHEN USING A FUNNEL
OR ANY OTHER ELEMENT, MAKE SURE IT IS PERFECTLY CLEAN.
Air filter
•
Remove the saddle
•
Unhook the connector from the air-box
cover
Maintenance
MAIN - 49