MOTO GUZZI 2Q000297 Service Station Manual page 222

Chassis
•
Fit the braking disc on the drilled bolt
by locking the screws with the washers
using a torque wrench.
•
When refitting the bevel pinion case on
the transmission, bear in mind that the
oil passage grooves with holes should
be fitted vertically (observing the
grooves, one should be facing up-
wards and the other facing the ground).
Installing
•
Insert the sleeve and base on the bevel
pinion of the gearcase.
CHAS - 222
V7 III ABS