MOTO GUZZI 2Q000297 Service Station Manual page 214

Chassis
•
Remove the conical crown.
•
Slide off the drilled bolt from the bear-
ing.
•
Remove the sealing ring.
•
Slide off the bearing from the cover us-
ing the suitable punch.
•
Remove the gaskets unit made up of paper/steel/paper or foamet/steel/foamet
CAUTION
PAY ATTENTION TO THE TYPE OF GASKETS PRESENT, AS DURING INSTALLATION THE SAME
SOLUTION MUST BE INSTALLED
CHAS - 214
V7 III ABS