Chassis
•
Check that both tapered bearings are not damaged, that the rollers are not damaged or
worn; otherwise, replace them.
•
Check that the adjustment washers are not deformed or broken; otherwise, replace them.
•
Check that the sealing rings are not shattered, spoiled or worn; otherwise, replace them.
Montaggio
•
If the bevel pinion should be replaced,
replace also the crown fitted on the
housing. The pinion and the crown
should have the same number stam-
ped.
•
Fit the external ring of the tapered
bearings on the bevel pinion holder
case using the suitable punch
(19926400).
CHAS - 210
V7 III ABS