MOTO GUZZI 2Q000297 Service Station Manual page 91

V7 III ABS
TABLE K - INJECTORS
•
Check the correct connection of the in-
jectors
•
The cable of the engine head temper-
ature bulb (1) must pass under the rub-
ber pipe
TABLE L - CONNECTION OF THE LEFT LAMB-
DA AND REAR ABS SENSOR
•
Using a clamp, aligned with the frame
flap fixing the side fairing, fasten the
lambda probe wiring harness so that
the cables are covered
Electrical system
ELE SYS - 91