Electrical system
TABLE I - NEUTRAL SENSOR CABLES PAS-
SAGE
•
The wiring harness (1) of the neutral
sensor must pass through the filter box
support and in the cable guide (2)
TABLE J - OIL PRESSURE and SECONDARY
AIR SENSORS
1. Oil pressure bulb
2. Secondary air system
3. Engine ground
4. Left injector
5. Right injector
6. Right Lambda probe
7. Battery ground
TABLE J1
•
Check the correct connection of the oil
pressure bulb connector (1) and of the
secondary air connector (2)
ELE SYS - 90
V7 III ABS