MOTO GUZZI 2Q000297 Service Station Manual page 202

Chassis
- unscrew to loose the spoke;
•
The indicative tightening torque of the nipples is:
- front wheel 3 Nm (2.21 lb ft)
- rear wheel 4 Nm (2.95 lb ft).
•
Repeat the operation for all spokes by proceeding in successive order;
•
After having adjusted the tension of the wheel spokes, check the axial and radial clearance
of the wheel rim.
CAUTION
DO NOT ADJUST THE TENSION OF THE WHEEL SPOKES WITH TIRES FITTED ON THE WHEEL
RIM, AS THIS COULD CAUSE BREAKING OF THE NIPPLE GUARDS AND RESULTING IN HOLES
OF THE AIR CHAMBER.
IT IS IMPORTANT TO LOCK THE ROTATION OF ALL NIPPLES.
LOOSENING THE NIPPLE MODIFIES THE TENSION OF THE WHEEL SPOKES COMPROMISING
THE SAFETY OF THE WHEEL RIMS AND THE STABILITY OF THE VEHICLE
Swinging arm
Pos. Description
1 Pins fixing swingarm to gearbox
2 Lock washer fastening on pin
3 Nut fixing gearcase to swingarm
4 Pin fixing the rear calliper holding
plate to swingarm
5 Swingarm clamp retaining screw
CHAS - 202
S
WINGARM
Type Quantity
M20 2
M20 2 50 Nm (36.88 lb ft)
M8 4 25 Nm (18.44 lb ft)
M16 1 35 Nm (25.81 lb ft)
M10 1 50 Nm (36.88 lb ft)
V7 III ABS
Torque Notes
- Fully home with no
preload
Hold the pin
Hold the pin
-
-