MOTO GUZZI 2Q000297 Service Station Manual page 94

Electrical system
TABLE N2
•
The wiring harness of the lambda
probe (1) must pass through the filter
box and starter motor positive cable (2)
TABLE O - REAR BRAKE WIRING HARNESS
PASSAGE
•
Check that the rear brake sensor con-
nector is well connected
TABLE O1
•
Pass the wiring harness of the rear
brake sensor (1) and of the rear BAS
sensor (2) through the cable grommet
(3) mounted on the engine and inside
the gearbox clutch lever.
ELE SYS - 94
V7 III ABS