MOTO GUZZI 2Q000297 Service Station Manual page 78

Electrical system
•
Pass the ABS sensor wiring harness
around the steering column and
through the metallic cable grommet (4)
on the frame
TABLE B - STEERING LIGHTS CABLE PASSAGE ON THE HANDLE BAR
•
Using the cable guides (1), fasten the RH light switch wiring harness with the throttle cable
•
Using the cable guide (2), fasten the front stop switch wiring harness with the front brake
pipe
•
Using the cable grommets (3), fasten the LH light switch wiring harness with the clutch cable
ELE SYS - 78
V7 III ABS