Suspensions
Reassembling the fork
CAUTION
ALL COMPONENTS MUST BE CAREFULLY WASHED AND DRIED WITH COMPRESSED AIR BE-
FORE REFITTING.
•
Carry out any necessary service oper-
ation.
•
Insert the pumping member unit with
the counter spring and the ring in the
bearing tube.
•
Check that the upper guide bushing is
fitted on the wheel holder fork leg.
•
Insert the lower sliding bushing in its
seat on the bearing tube.
•
Reassemble the bearing tube in the
wheel holder fork leg.
SUSP - 184
V7 III ABS