MOTO GUZZI 2Q000297 Service Station Manual page 197

V7 III ABS
•
Loosen the two wheel pin locking
screws;
•
Unscrew and remove the wheel pin;
•
Working on the opposite side, remove
the left spacer;
NOTE
DURING REFITTING, PAY ATTENTION TO THE CORRECT
POSITIONING OF THE SPACER WHICH MUST BE INSER-
TED IN THE DUST SEAL UNTIL IT REACHES THE BEAR-
ING
•
Working on the opposite side, remove
the left spacer;
NOTE
DURING REFITTING, PAY ATTENTION TO THE CORRECT
POSITIONING OF THE SPACER WHICH MUST BE INSER-
TED IN THE DUST SEAL UNTIL IT REACHES THE BEAR-
ING
Chassis
CHAS - 197