Chassis
•
Remove the shimming washer be-
tween the swingarm right arm and the
gearbox.
Checking
•
Check that the universal joint is not damaged, the gear teeth inserting in the sleeve grooves
and the grooves on the joint are not deformed or damaged; otherwise, replace the joint.
•
Check that the rubber bellows are not cut or pierced; otherwise, replace it.
•
Check that the swingarm pin threads and the swingarm fixing nuts are not damaged, de-
formed or flattened; otherwise, replace them.
•
Check that the sleeve grooves are not damaged, deformed or deteriorated; otherwise, re-
place the sleeve.
•
Check that the spring is not deformed; otherwise, replace it.
•
Check that the sealing ring (Seeger) is still flexible and is not deformed.
•
Check that the sleeve outer toothing and internal grooves are not damaged.
Bevel gears
CHAS - 206
V7 III ABS