Suspensions
•
Drain out all the oil inside the stan-
chion.
NOTE
FOR EASY DRAINAGE OF THE OIL INSIDE THE PISTON
ROD, PRESS THE STANCHION IN THE WHEEL HOLDER
SLEEVE TO PUMP OIL OUT.
•
Carefully check each part of the stan-
chion and make sure that there are no
damaged elements.
•
If there are no damaged or worn ele-
ments, refit the stanchion; otherwise,
replace the damaged elements.
NOTE
FOR EASY DRAINAGE OF THE OIL INSIDE THE PISTON
ROD, PRESS THE STANCHION IN THE WHEEL HOLDER
SLEEVE TO PUMP OIL OUT.
Disassembling the fork
•
Drain all the oil from the stem.
•
Block the wheel holder fork leg on the
vice.
•
Undo the bottom screw and remove it
with the corresponding gasket.
•
Remove the dust scraper using a
screwdriver as a lever.
CAUTION
BE CAREFUL NOT TO DAMAGE THE FORK LEG RIM AND
THE DUST SCRAPER.
SUSP - 182
V7 III ABS