MOTO GUZZI 2Q000297 Service Station Manual page 95

V7 III ABS
TABLE O2
•
Using a clamp, fasten the wiring har-
ness of the rear brake sensor (1) to the
wiring harness of the rear ABS sensor
(2)
•
The rear ABS sensor wiring harness
must pass through the cable grommet
(3)
TABLE O3
•
The wiring harness of the rear ABS
sensor (2) must pass through the cable
grommet (3) located on the bracket (4)
that, in its turn, fixes the wiring harness
of the engine control unit (5) in line with
the rubber ring (6)
Electrical system
ELE SYS - 95