V7 III ABS
28./
29.Engine revs positive signal (pick up)
30./
31.Left lambda probe heater signal (1)
32.Right injector control (2)
33.Light logic relay control
34.Left injector control (1)
Diagnostic tool - Control unit info screen page
In this screen page are read the general data re-
garding the control unit, for example: type of soft-
ware, mapping, control unit programming data
•
ISO code
•
Drawing number (identification inser-
ted by manufacturer)
•
HW number (hardware number)
•
SW ver. (software version)
•
Approval number
•
Author last progr. (author of the last
programming)
•
HW MM version (hardware MM ver-
sion)
•
Mapping (indicates the mapping num-
ber)
•
Manufacturing data (control unit man-
ufacturing data)
•
Programming data (control unit pro-
gramming data)
•
NIP code
Diagnostic tool - Parameters and statuses
This screen page shows the parameters meas-
ured by the several sensors (engine revs, engine
temperature, etc.) or values set by the control unit
(injection time, ignition advance); in addition to the
parameters in this screen page, are also shown
the status of the vehicle devices or the operation
condition of some vehicle systems (for example,
lambda probe functioning status)
Electrical system
ELE SYS - 141