V7 III ABS
•
Remove the braking disc from the dril-
led bolt.
•
Undo the screws and collect the plates
and the wave washers.
•
Slide off the complete cover.
•
Slide off the gaskets.
•
Slide off the shimming ring.
•
Remove the O-ring from the groove on
the drilled bolt.
From the cover, slide off:
•
The needle bearing.
•
Remove the internal ring of the needle
bearing using a suitable punch
(19907000).
•
Remove the washer.
•
Remove the washer.
•
Undo the screws and collect the corre-
sponding safety plates.
Chassis
CHAS - 213