Display Mpls Ldp Interface; Display Mpls Ldp Lsp - HP FlexFabric 12500 Command Reference Manual

display mpls ldp interface

Use display mpls ldp interface to display LDP interface information.
Syntax
display mpls ldp interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays information about all LDP interfaces.
Examples
# Display information about all LDP interfaces.
<Sysname> display mpls ldp interface
Interface
GE3/0/2
XGE2/0/6
Table 15 Command output
Field
Interface
MPLS
LDP
Auto-config
Related commands
• mpls ldp
mpls ldp enable
•

display mpls ldp lsp

Use display mpls ldp lsp to display information about LSPs generated by LDP.
Syntax
display mpls ldp lsp [ vpn-instance vpn-instance-name ] [ destination-address mask-length ]
MPLS LDP
Enabled Configured
Enabled Configured
Description
Interface enabled with LDP.
Whether the interface is enabled with MPLS.
Whether the interface is configured with the mpls ldp enable command.
LDP automatic configuration information:
•
If LDP autoconfiguration is enabled, this field displays IGP process
information, such as OSPF process ID and OSPF area ID.
•
If LDP autoconfiguration is disabled, this field displays a hyphen (-).
33
Auto-config
-
-