Display Irf Link - HP 12500 series Command Reference Manual

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# In standalone mode, display the basic IRF settings of the device.
<Sysname> display irf configuration
MemberID Priority IRF-Port1
--
# In IRF mode, display all members' basic IRF settings.
<Sysname> display irf configuration
MemberID
1
2
Table 2 Command output
Field
MemberID
Priority
NewID
IRF-Port1
IRF-Port2

display irf link

Use display irf link to display IRF link information, including IRF ports, physical IRF ports, IRF link
status, and the MDC to which each physical port belongs.
Syntax
display irf link
Views
Any view
1 disable
NewID IRF-Port1
1 Ten-GigabitEthernet1/8/0/1
Ten-GigabitEthernet1/8/0/2
2 disable
Description
Current member ID of the device.
If no member ID is assigned, this field displays two hyphens (--).
Member priority.
This field is displayed only when the device is operating in standalone mode.
Member ID assigned to the device. This member ID takes effect at reboot.
This field is displayed only when the device is operating in IRF mode.
Physical ports bound to IRF-port 1. The bindings take effect at reboot.
If no physical port is bound to the IRF port, this field displays disable.
Physical ports bound to IRF-port 2. The bindings take effect at reboot.
If no physical port is bound to the IRF port, this field displays disable.
IRF-Port2
disable
IRF-Port2
disable
Ten-GigabitEthernet2/8/0/1
Ten-GigabitEthernet2/8/0/2
4