Display Ospf - HP 5920 Series Command Reference Manual

Examples
# Configure the device to generate external and internal discard routes with preferences 100 and 200,
respectively.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] discard-route external 100 internal 200

display ospf

Use display ospf to display OSPF process information.
Syntax
display ospf [ process-id ] [ verbose ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays information about all OSPF processes.
verbose: Displays detailed OSPF process information. Without this keyword, the command displays brief
OSPF process information.
standby slot slot-number: Displays backup OSPF process information for an IRF member device. Without
this option, the command displays OSPF process information.
Examples
# Display detailed OSPF process information.
<Sysname> display ospf verbose
RouterID: 192.168.1.2
Route tag: 0
Multi-VPN-Instance is not enabled
Opaque capable
Originating router-LSAs with maximum metric
Condition: On startup while BGP is converging, State: Inactive
Advertise stub links with maximum metric in router-LSAs
Advertise summary-LSAs with metric 16711680
Advertise external-LSAs with metric 16711680
ISPF is enabled
SPF-schedule-interval: 5 50 200
LSA generation interval: 5
LSA arrival interval: 1000
OSPF Process 1 with Router ID 192.168.1.2
OSPF Protocol Information
Router type: NSSA
97