Removing The Balancer Shaft; Removing The Torque Limiter; Removing The Starter Idler Gear; Removing The Kickstarter Shaft - KTM 450 EXC-R EU Repair Manual

30/DISASSEMBLING ENGINE

Removing the balancer shaft

Removing the torque limiter

Removing the starter idler gear

Removing the kickstarter shaft

Removing the kickstarter idler gear

Pull balancer shaft
700029-10
Remove the screw with the washer. Take off torque limiter
200120-11
Remove the lock ring. Take off the washer. Take off starter idler gear
200121-12
Apply counterpressure to kickstarter spring
Remove spring hanger
Turn kickstarter shaft
200110-10
Remove the lock ring. Take off the washer. Take off kickstarter idler gear
200120-12
out of the bearing seats and remove it.
. Remove screw
. Release tension on the kickstarter spring.
counterclockwise and pull it out.
67
.
.
.
.