Mounting Advices; Operating Modes; Overview; Controlling A Siemens Videomatrix - Siemens SUT50 User Manual

Mounting advices

5 Mounting advices
5.1

Operating modes

5.2

Overview

Interface
LAN
LAN
Serial (TTY)
Serial (RS232)
5.2.1

Controlling a Siemens videomatrix

12
Security Products
Together with other peripheral equipment the SUT50 is capable of a variety of
configurations and operating modes.
Not all configurations and operating modes can be described here in detail. Please refere to the
instruction manuals of the connected peripherical equipment to archieve the most efficient and secure
solution.
The following table provides an overview for the most important operating modes
of the SUT50:
Operating Mode
SIMATRIX LAN
SIMATRIX via Router
SIMATRIX-Polling-Mode
SIMATRIX Master-Mode
The HMI device SUT50 can be connected via TTY-interfaces „Term 1" to „Term 8"
(depends on type and upgrading) as well as via RS232-Interfaces „COM2" to
„COM4".
In RS232 mode the HMI device SUT50 has to be supplied by a seperate power supply
Fig. 5 Controlling a Siemens-Videomatrix
Periphery
SIMATRIX SYS Server
SUT50 as Console Router
SIMATRIX
SIMATRIX
Recommended configuration
Ethernet
Ethernet
„TTY-Slave"
2400 Baud
„TTY-Master"
2400 or 9600 Baud
UM_SUT50_EN.doc
06.2014