Planning Use; Mounting Positions And Type Of Fixation - Siemens SIMATIC HMI 177 Operating Instructions Manual

Planning Use

3.1

Mounting positions and type of fixation

3.1
Mounting position
The wall holder is designed for vertical mounting.
The terminal box is designed for surface mounting independently of cabinets or control
panels.
The terminal box is self-ventilated and is approved for all mounting positions. Note that the
guaranteed protection rating is only ensured if the connecting cable or the dummy cap is
plugged into the terminal box.
Mobile Panel 177 (WinCC flexible)
Operating Instructions (Compact), Edition 07/2005
3
3-1