Siemens LMS14 User Manual page 492

Forced heat draw DHW
Telephone customer
service
492/617
Building Technologies Division
Line no. Operating line
7165 Forced heat draw DHW
Off
On
This parameter allows you to specify that the heat should primarily be conveyed to the
DHW circuit while the chimney sweep function is active.
Off
The heat has to be conveyed to the heating circuits.
On
When the chimney sweep function is active, the heat is primarily conveyed to the DHW
circuit.
Line no. Operating line
7170 Telephone customer service
Setting the phone number that appears on the info display.
User Manual LMS14...
6 The settings in detail
CC1U7471en
28.01.2015