Setpoints - Siemens LMS14 User Manual

Comfort setpoint
Reduced setpoint
Frost protection setpoint
Comfort setpoint max
Room temperature
Key
Building Technologies Division

6.5.5 Setpoints

Line no.
HC1 HC2 HC3
710 1010 1310
Line no.
HC1 HC2 HC3
712 1012 1312
Line no.
HC1 HC2 HC3
714 1014 1314
In Protection mode, the room temperature is prevented from falling below a certain
level. This means that the Frost Protection setpoint of the room temperature is
maintained.
Line no.
HC1 HC2 HC3
716 1016 1316
The room temperature can be shifted according to different setpoints. These setpoints
become active depending on the selected operating mode, thus producing different
temperature levels in the rooms. The ranges of adjustable setpoints result from
interdependencies, as this is shown in the following diagram:
0 2 4 6
Figure 16: Setpoints
Line no.
HC1 HC2 HC3
710 1010 1310
712 1012 1312
714 1014 1314
716 1016 1316
User Manual LMS14...
6 The settings in detail
Operating line
Comfort setpoint
Operating line
Reduced setpoint
Operating line
Frost protection setpoint
Operating line
Comfort setpoint max
BZ 712 / BZ 1012 / BZ 1312
BZ 714 / Bz1014 / Bz1314
8 10 12 14 16
Meaning
TRK Room temperature Comfort setpoint
TRR Room temperature Reduced setpoint
TRF Frost protection setpoint
TRKmax Maximum room temperature Comfort setpoint
BZ 710
BZ 716
BZ 1010
BZ 1016
BZ 1310
BZ 1316
18 20 22 24 26
7471z83/0910
°C
135/617
CC1U7471en
07.05.2014