Expansion I/O Units; Ac Power Supply Unit; Cpm2C-Cif01-V1 Peripheral/Rs-232C Adapter Unit - Omron CPM2C-S100C Operation Manual

Unit Components
2-2-2

Expansion I/O Units

2-2-3

AC Power Supply Unit

Front View
1. Terminal block
2. LED indicator
1,2,3...
2-2-4

CPM2C-CIF01-V1 Peripheral/RS-232C Adapter Unit

Front View
1. Peripheral port
2. Cable switch (SW1)
3. RS-232C port
4. Connector
1,2,3...
48
Note Refer to the CPM2C Programmable Controller Operation Manual (W356) for
descriptions of the main components of the Expansion I/O Units and Expan-
sion Units.
1. Terminal Block
Terminals for AC power supply input and service power supply (24 VDC).
2. LED Indicator
Lights when power is supplied.
3. CPU Unit Power Supply Connector
Use the connecting cable provided as an accessory to connect this con-
nector to the power supply connector on the CPU Unit (24 VDC).
Note The ratings for the CPM2C-PA201 AC Power Supply Unit are 100 to
240 VAC input; 24 VDC/600 mA output. The maximum current that
can be supplied via the CPU Unit power supply connector and the
service power supply terminals on the terminal block is 600 mA.
Do not use the CPM2C-CIF01-V1 with any PC other than the
CPM2C. Do not connect another CPM2C-CIF01-V1 or the
CPM2C-CIF11 to the CPM2C-CIF01-V1. The CPM2C-CN111 can
be connected to the CPM2C-CIF01, but the peripheral port and
the RS-232C port of the CPM2C-CN111 cannot be used
simultaneously. If an attempt to use these ports simultaneously is
made, communications will not be performed properly, and this
may result in malfunction of equipment.
*: The CPM2C-CIF01 does not have a cable switch (SW1).
1. Peripheral Port
Used to connect to Programming Devices (including Programming Con-
soles), host computers, or general-purpose external devices. Use a spe-
cial connecting cable (CS1W-CN114, CS1W-CN118) for connections.
With the CPM2C-CIF01-V1, the cable switch (SW1) can be turned ON to
Bottom Side
3. CPU Unit power supply connector
Section 2-2