Expansion I/O Units - Omron CP1H Brochure

Expansion I/O units

Expand as needed
CJ-series Special I/O Units and CPU Bus Units Can Be Connected
Peripheral Devices
Peripheral USB port
Built-in Analogue I/O
Terminal Block
Analogue I/O
• CP1W-ME05M
• Analogue I/O
Memory Cassette
(CP1H-XA
CPU Units Only)
Standard USB cable
Only one I/O
Connecting Cable
can be used.
A maximum of seven CPM1A Expansion I/O Units can be connected.
For details on Unit restrictions, refer to page 15.
12
Status and Operation Monitoring High-speed Counters for Four Axes
7-segment display Built-in Input Terminal Block
Memory Cassette
RS-232C or RS-422A/485
Option Boards
Saving the Program Serial Communications
• The following
optional serial
interfaces can be
used for two ports
CP1W-CIF01
RS-232C
Option Board
CP1W-CIF11
RS-422A/485
Option Board
7 Units max.
7 Units max.
CP1W-EXT01
CJ Unit Adapter
Built-in Output
Terminal Block
Four Pulse Outputs
Use a CP1W-CN811 I/O connecting
cable when using CJ1- and CPM1A
expansion units at the same time.
Up to 320 I/O points can be obtained by
connecting seven Expansion I/O Units.
Expansion I/O Units can also be wired below by using
CP1W-CN811 I/O Connecting Cable.
Ethernet
Controller Link
End Cover
A maximum of two
CJ-series Special I/O
Units or CPU Bus
Units can be
connected. (For
details on Units that
can be connected,
refer to page 14.)
DeviceNet
CompoBus/S
Serial Communications
CP1W-CN811
I/O Connecting
Cable: 80 cm