Reading And Setting The Clock - Omron CPM2C-S100C Operation Manual

Programming Console Operations

8-2-30 Reading and Setting the Clock

1,2,3...
192
This operation is used to read or set the CPU's clock. The clock can be read in
any mode, but can be set in MONITOR or PROGRAM mode only.
Operation
Read clock OK
Set clock No
1. Press the CLR Key to bring up the initial display.
2. Press the FUN Key, SHIFT Key, and then the MONTR Key to display the
date and time.
FUN
SHIFT
MONTR
3. Press the CHG Key to change the date and/or time.
The digit that can be changed will flash. If necessary, input a new value
with the Up and Down Arrow Keys or Numeric Keys. Press the CHG Key
to move the cursor to the next digit. The following table shows the setting
ranges for each value.
Year Month Day
00 to 99 01 to 12 01 to 31
4. Press the WRITE Key to write the new value.
WRITE
Press the CLR Key to return to the initial display.
RUN MONITOR
OK
OK
TIM 00-00-00
00:00:00 SUN(0)
TIM CHG?00-00-00
11:04:32 SUN(0)
CHG
Hour Minute
00 to 23 00 to 59
TIM 00-09-22
11:04:32 FRI(5)
Section 8-2
PROGRAM
OK
OK
Second Day-of-week
00 to 59 0 to 6
(SUN to SAT)