Handling; Mounting/Removing Eeprom - Omron CPM2C-S100C Operation Manual

Handling

LED Indicator

10-3 Handling

10-3-1 Mounting/Removing EEPROM

!Caution Do not mount or remove the EEPROM with the CPM1-EMU01-V1 connected
Mounting EEPROM
1,2,3...
Removing EEPROM
222
CONNECT ERR (red)
(green)
OFF OFF
ON OFF
Blinking OFF
ON Blinking
OFF ON
OFF Blinking
to the PC. Doing so may damage the EEPROM.
1. Lift up the lock lever.
2. Straighten the pins on the EEPROM, line up with the socket and lower into
the socket, as shown in the following diagram. If the EEPROM is loose,
place it in the center of the socket.
EEPROM
2. Insert the EEPROM.
3. Gently hold down the EEPROM and pull down the lock lever.
Lift up the lock lever and detach the EEPROM.
Meaning
Not connected to PC (power supply OFF).
Connected to a recognized PC.
Uploading/downloading data.
Host link communications error, retry by user.
PC model and EEPROM data not compatible.
One of the following errors has occurred:
• An unrecognized PC is connected.
• An EEPROM error (EEPROM not present,
EEPROM defect, or no program to download)
occurred.
• A checksum error occurred.
1. Lift up the lock lever.
3. Pull down the lock lever.
Section 10-3