Error Log Settings - Omron CPM2C-S100C Operation Manual

Basic PC Operation and I/O Processes
4-7-9

Error Log Settings

Input Time Constants for IR 000
Time constant for IR 00005 (1 digit BCD; see below.)
Time constant for IR 00003 to IR 00004 (1 digit BCD; see below.)
Time constant for IR 00000 to IR 00002 (1 digit BCD; see below.)
Default: 0000 (8 ms for each)
Input Time Constants for IR 001 to IR 009
DM 6621: IR 001 and IR 002
DM 6622: IR 003 and IR 004
DM 6623: IR 005 and IR 006
DM 6624: IR 007 and IR 008
DM 6625: IR 009
Time constant for IR 002, IR 004, IR 006, and IR 008
Time constant for IR 001, IR 003, IR 005, IR 007, and IR 009
Default: 0000 (8 ms for each)
The nine possible settings for the input time constant are shown below. (Set
only the rightmost digit for each setting for IR 000.)
00 (Hex): 8 ms 01 (Hex): 1 ms 02 (Hex): 2 ms
03 (Hex): 4 ms 04 (Hex): 8 ms 05 (Hex): 16 ms
06 (Hex): 32 ms 07 (Hex): 64 ms08 (Hex): 128 ms
Error Detection and Error Log Operation (DM 6655)
Make the settings shown below to determine whether or not a non-fatal error
is to be generated when the cycle time exceeds 100 ms or when the voltage
of the built-in battery drops, and to set the method for storing records in the
error log when errors occur.
Low battery voltage detection
0 (Hex): Detect
1 (Hex): Don't detect
Cycle time over detection
0 (Hex): Detect
1 (Hex): Don't detect
Error log storage method
0 (Hex): Error records for the 7 most recent errors always stored (older errors de-
leted).
1 (Hex): Only the first 7 error records stored (no errors stored beyond that point).
2 to F (Hex): Error records not stored.
Default: Low battery voltage and cycle time over errors detected, and error records
stored for the 7 most recent errors.
Battery errors and cycle time overrun errors are non-fatal errors.
Refer to 4-8 Error Log below for details on the error log.
15
Bit
DM 6620
Not used.
15
Bit
DM 6621 to DM 6625
15
Bit
DM6655 0
Always
0
Section 4-7
0
0
0
109