Chassis Rear Rack-Mount Brackets - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1004 Router Overview and Installation
The following shows where to attach the front rack-mount brackets to the Cisco ASR 1004 Router.
Figure 65: Attaching the Front Rack-Mount Brackets to the Cisco ASR 1004 Router
1
2
Step 2
Position the front rack-mount bracket top hole with the chassis first top hole behind the side vent holes.
Step 3 Insert and tighten the black screws on one side.
Step 4 Repeat Step 1 through Step 3 on the other side of the chassis. Use black screws to secure the rack-mount brackets to the
chassis.
Step 5 Install the chassis in a rack. To install the Cisco ASR 1004 Router in a rack, go to the
Router in a Rack, on page
What to Do Next
This completes the steps for attaching the front rack-mount brackets to the Cisco ASR 1004 Router.

Chassis Rear Rack-Mount Brackets

If you are rack-mounting the chassis using the rear rack-mount brackets, then this type of installation provides
for the chassis being recessed in the rack.
To install the front rack-mount brackets on the Cisco ASR 1004 Router, perform the following steps:
Front rack-mount bracket
Front rack-mount bracket
screws
195.
Chassis Rear Rack-Mount Brackets
3
4
Installing the Cisco ASR 1004
Cisco ASR 1000 Series Router Hardware Installation Guide
Chassis side vent holes
Front rack-mount bracket
and ear holes
193