Cisco ASR 1013 Hardware Installation Manual page 212

Connecting a Terminal to the Cisco ASR 1000 Series RP Console Port
1
Step 2 Run the cable up and through the cable-management bracket and connect the other end of the RJ-45 cable to the RJ-45
adapter (see the following image).
Figure 56: Cable-Management Bracket with Cabling in the Cisco ASR 1006 Router
1
2
Step 3
Connect the adapter to your video terminal to complete the cable connection.
Step 4 Power on your video terminal.
Step 5 Configure your video terminal to match the following default console port settings: 9600 baud, 8 data bits, No parity
generation or checking, 1 stop bit, and No flow control.
Step 6 Go to the Connecting the System Cables, on page 179
Cisco ASR 1000 Series Router Hardware Installation Guide
178
CONsole port
AUXiliary connection
MGMT Ethernet port
to continue the installation.
Cisco ASR 1006 Router Overview and Installation
2
3
4
AUXiliary port
BITS port
Cable-management U
feature device