Cisco Asr 1002 Ac Power Supply Leds And Connector - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1000 Series Routers Component Overview
Guide pins located at the rear of these modules help center locate the modules and reduce stress to the midplane
and module mounted connectors. Two captive screws (tool operated latches) are provided on the modules
face plate (chassis rear) to secure these modules into the chassis.

Cisco ASR 1002 AC Power Supply LEDs and Connector

The following figure shows the AC power supplies at the rear of the Cisco ASR 1002 Router. The Cisco ASR
1002 Router supports up to two power supplies.
Figure 16: Cisco ASR 1002 Router AC Power Supply
1
2
3
4
The following table describes the power supply LEDs and connectors on the rear of the chassis.
Chassis ESD socket 5
AC power supply slot 6
number 0
AC power supply On (|) 7
/Off (O) switch
AC power supply LEDs 8
Cisco ASR 1000 Series Router Hardware Installation Guide
Cisco ASR 1002 Router AC Power Supply
AC power supply fan
AC power supply captive
installation screw
AC power supply slot
number 1
AC power inlet
67