Cisco Asr 1002 Router Mgmt Ethernet Rj-45 Port Pinouts - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1002 Router Mgmt Ethernet RJ-45 Port Pinouts

Description
Dimensions (H x W x D)
Weight
Nominal operating temperature
Nominal operating humidity
Storage temperature
Power consumption
Cisco ASR 1002 Router Mgmt Ethernet RJ-45 Port Pinouts
Unless stated otherwise, the specifications for the Cisco ASR 1002-X Router are the same as the Cisco
Note
ASR 1002 Router specifications listed in this section.
The Cisco ASR 1002 Router has RJ-45 port for the 10/100/1000 Ethernet connections. The RJ-45 port supports
IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET,
100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors.
Cisco does not supply Category 5 UTP cables; these cables are available commercially.
The following table lists the RJ-45 port pinout for the front panel Management Ethernet port.
Cisco ASR 1000 Series Router Hardware Installation Guide
626
Cisco ASR 1000 Series Router Specifications
Specification
Height: 3.5 in. (8.9 cm)
Width: 17.25 in. (19-inch rack-mount or optional 23 Telco adaptor
brackets)
Depth: 22.50 in. (including card handles, cable-management
brackets, and power supply handles) for mounting in a
600mm-enclosed cabinet
• 40 lbs (18.143 kg) for a fully loaded Cisco ASR 1002 Router
or Cisco ASR 1002-F Router
• 43.35 lbs (19.662 kg) for a fully loaded Cisco ASR 1002-X
Router
• 41° to 104° F
• 5° to 40° C
10% to 85%
• –38° to 150° F
• –40° to 70° C
• Maximum DC: 590W
• Maximum AC: 560W
• Maximum (Out): 470W