Cisco Asr 1013 Router Power Supply Overview; Power Cords Supported By The Cisco Asr 1013 Router - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1013 Router Power Supply Overview

Cisco ASR 1013 Router Power Supply Overview
This section provides information about the Cisco ASR 1013 power supply input requirements and power
cable options.
The DC power supply for the Cisco ASR 1013, ASR 1006, ASR 1004, and ASR 1002 routers operate at
individual specifications. The following table shows the common input ranges and circuit breaker requirements.
Table 80: Cisco ASR 1000 Series Router DC Power Supply System Input Requirements
Cisco ASR 1000
Series Router
DC Power
Supply
Cisco ASR 1006
Cisco ASR 1004
Cisco ASR 1002
Cisco ASR 1013
For example, the
Cisco ASR 1002
Router DC
power supply,
with 16 Amp
input rating
must use an
AWG #12 gauge
wire for a 20 A
circuit breaker
and an AWG
#10 gauge wire
for a 30 A
circuit breaker.

Power Cords Supported by the Cisco ASR 1013 Router

The following power cords are supported by the Cisco ASR 1013 Router:
• CAB-AC20A-90L-IN—20 A AC right-angle power cord—International
• CAB-4000W-US1—Power Cord, 250 VAC 20 A, Right Angle C19, NEMA 6-20 Plug, US
Cisco ASR 1000 Series Router Hardware Installation Guide
394
System Input Circuit Breaker
Rating (Amps) Amps
Minimum
40 Always 50
24 30
16 20
40 Always 50
Cisco ASR 1013 Router Overview and Installation
AWG # Wire
Maximum Minimum
Always AWG
#6 wire
40 10
30 12
Always AWG
#6 wire
Maximum
8
10